BTS3035TFATMA1 vs BTS4142NHUMA1 Vergleich
Detaillierter Direktvergleich von BTS3035TFATMA1 von Infineon und BTS4142NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3035TFATMA1 | BTS4142NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,61 | $0,97 |
| Product Type | Low-Side Power Switch | Smart High-Side Power Switch (Classic PROFET 24V) |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | — |
| Gehäuse | PG-TO252-3-313 (DPAK) | PG-SOT223-4 |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS-Status | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Switch Topology | — | High-side, N-channel vertical MOSFET |
| Nominal Output Current | — | 1.4 A |
| On-State Resistance (RDS(on)) | — | 70 mOhm (typical) |
| Betriebsversorgungsspannung | — | 6 V to 42 V |
| Load-Dump Protection | — | Yes (integrated overvoltage clamp) |
| Overload Protection | — | Yes (current limiting) |
| Thermal Protection | — | Yes (shutdown with auto-restart) |
| Undervoltage Shutdown | — | Yes (auto-restart with hysteresis) |
| ESD Protection (Input Pin) | — | Yes |
| Diagnostic Feedback | — | Yes (open-load, fault) |
| Betriebstemperatur | — | -40C to +150C (junction) |