BTS3035TFATMA1 vs BTS4142NHUMA1 Comparación
Comparación detallada lado a lado de BTS3035TFATMA1 por Infineon y BTS4142NHUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3035TFATMA1 | BTS4142NHUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,61 | $0,97 |
| Product Type | Low-Side Power Switch | Smart High-Side Power Switch (Classic PROFET 24V) |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Rango de temperatura de funcionamiento | -40C to +150C (junction) | — |
| Encapsulado | PG-TO252-3-313 (DPAK) | PG-SOT223-4 |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Estado RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Switch Topology | — | High-side, N-channel vertical MOSFET |
| Nominal Output Current | — | 1.4 A |
| On-State Resistance (RDS(on)) | — | 70 mOhm (typical) |
| Tensión de alimentación de funcionamiento | — | 6 V to 42 V |
| Load-Dump Protection | — | Yes (integrated overvoltage clamp) |
| Overload Protection | — | Yes (current limiting) |
| Thermal Protection | — | Yes (shutdown with auto-restart) |
| Undervoltage Shutdown | — | Yes (auto-restart with hysteresis) |
| ESD Protection (Input Pin) | — | Yes |
| Diagnostic Feedback | — | Yes (open-load, fault) |
| Temperatura de funcionamiento | — | -40C to +150C (junction) |