BTS3035TFATMA1 vs BTS52004EKAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS3035TFATMA1 von Infineon und BTS52004EKAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3035TFATMA1 | BTS52004EKAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,61 | $1,65 |
| Product Type | Low-Side Power Switch | Quad Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | Infineon Smart6 |
| Number of Channels | 1 | 4 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | -40 °C to +150 °C junction |
| Gehäuse | PG-TO252-3-313 (DPAK) | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | 3 (per JEDEC J-STD-020) |
| RoHS-Status | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Topologie | — | High-Side, 1:1 N-Channel MOSFET with charge pump |
| On-Resistance (Ron, typ) | — | 200 mΩ per channel |
| Continuous Load Current per Channel | — | 800 mA |
| Operating Voltage Range (Vbb) | — | 5 V to 38 V |
| Load Dump Tolerance | — | Up to 38 V |
| Standby Current | — | [DATA_NEEDED: typical Ibb(off)] |
| Quiescent Current (active) | — | [DATA_NEEDED: Ibb(on) typ] |
| PWM Frequency (max) | — | 1 kHz |
| Protection Features | — | Short-circuit, overload, overtemperature, overvoltage, open-load detection |
| Diagnostic Output | — | IS pin (proportional load current sense) |