BTS3035TFATMA1 vs BTS52004EKAXUMA1 Comparación
Comparación detallada lado a lado de BTS3035TFATMA1 por Infineon y BTS52004EKAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3035TFATMA1 | BTS52004EKAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,61 | $1,65 |
| Product Type | Low-Side Power Switch | Quad Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | Infineon Smart6 |
| Number of Channels | 1 | 4 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Rango de temperatura de funcionamiento | -40C to +150C (junction) | -40 °C to +150 °C junction |
| Encapsulado | PG-TO252-3-313 (DPAK) | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL moisture sensitivity level] | 3 (per JEDEC J-STD-020) |
| Estado RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Topología | — | High-Side, 1:1 N-Channel MOSFET with charge pump |
| On-Resistance (Ron, typ) | — | 200 mΩ per channel |
| Continuous Load Current per Channel | — | 800 mA |
| Operating Voltage Range (Vbb) | — | 5 V to 38 V |
| Load Dump Tolerance | — | Up to 38 V |
| Standby Current | — | [DATA_NEEDED: typical Ibb(off)] |
| Quiescent Current (active) | — | [DATA_NEEDED: Ibb(on) typ] |
| PWM Frequency (max) | — | 1 kHz |
| Protection Features | — | Short-circuit, overload, overtemperature, overvoltage, open-load detection |
| Diagnostic Output | — | IS pin (proportional load current sense) |