BTS3035TFATMA1 vs ITS4090QEPDXUMA1 Vergleich
Detaillierter Direktvergleich von BTS3035TFATMA1 von Infineon und ITS4090QEPDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3035TFATMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power Distribution Switches |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,61 | $1,62 |
| Product Type | Low-Side Power Switch | Quad-Channel Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | 4 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | -40 °C to +150 °C (Tj) |
| Gehäuse | PG-TO252-3-313 (DPAK) | PG-TSDSO-14 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Family | — | PROFET (PROtected FET) 24V/48V |
| Topologie | — | High-Side Switch (N-Channel DMOS) |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |