BTS3035TFATMA1 vs ITS4090QEPDXUMA1 Comparación
Comparación detallada lado a lado de BTS3035TFATMA1 por Infineon y ITS4090QEPDXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3035TFATMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power Distribution Switches |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,61 | $1,62 |
| Product Type | Low-Side Power Switch | Quad-Channel Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | 4 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Rango de temperatura de funcionamiento | -40C to +150C (junction) | -40 °C to +150 °C (Tj) |
| Encapsulado | PG-TO252-3-313 (DPAK) | PG-TSDSO-14 (exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Estado RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Family | — | PROFET (PROtected FET) 24V/48V |
| Topología | — | High-Side Switch (N-Channel DMOS) |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |