BTS3046SDRATMA1 vs ITS4100SSJNXUMA1 Vergleich
Detaillierter Direktvergleich von BTS3046SDRATMA1 von Infineon und ITS4100SSJNXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3046SDRATMA1 | ITS4100SSJNXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,74 | $0,89 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | High-Side Power Switch |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| Gehäuse | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-8 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +150 C | [DATA_NEEDED: Tj range] |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | — |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Topologie | — | 1:1 N-Channel High-Side |
| Maximum Continuous Load Current | — | 2 A |
| On-State Resistance RDS(on) | — | [DATA_NEEDED: RDS(on) typical value] |
| Operating Supply Voltage Range | — | [DATA_NEEDED: VBB min/max] |
| Overvoltage Protection (Load Dump) | — | Yes |
| Overload Protection | — | Yes |
| Current Limitation | — | Yes |
| Short Circuit Protection | — | Yes |
| Thermal Shutdown with Restart | — | Yes |
| Reverse Battery Protection | — | Yes |
| Fast Demagnetization of Inductive Loads | — | Yes |
| Status / Diagnostic Output | — | Yes |
| RoHS-Status | — | Compliant |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |