BTS3046SDRATMA1 vs ITS4100SSJNXUMA1 Comparação
Comparação detalhada lado a lado de BTS3046SDRATMA1 por Infineon e ITS4100SSJNXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS3046SDRATMA1 | ITS4100SSJNXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,74 | $0,89 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | High-Side Power Switch |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| Encapsulamento | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-8 (exposed pad) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Faixa de temperatura de operação | -40 C to +150 C | [DATA_NEEDED: Tj range] |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | — |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Topologia | — | 1:1 N-Channel High-Side |
| Maximum Continuous Load Current | — | 2 A |
| On-State Resistance RDS(on) | — | [DATA_NEEDED: RDS(on) typical value] |
| Operating Supply Voltage Range | — | [DATA_NEEDED: VBB min/max] |
| Overvoltage Protection (Load Dump) | — | Yes |
| Overload Protection | — | Yes |
| Current Limitation | — | Yes |
| Short Circuit Protection | — | Yes |
| Thermal Shutdown with Restart | — | Yes |
| Reverse Battery Protection | — | Yes |
| Fast Demagnetization of Inductive Loads | — | Yes |
| Status / Diagnostic Output | — | Yes |
| Status RoHS | — | Compliant |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |