BTS3050EJXUMA1 vs BTS3125TFATMA1 Vergleich
Detaillierter Direktvergleich von BTS3050EJXUMA1 von Infineon und BTS3125TFATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3050EJXUMA1 | BTS3125TFATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,86 | $0,54 |
| Product Type | Smart Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| Technology | N-Channel Vertical Power MOSFET (HITFET +12V) | — |
| On-State Resistance (RDS(on)) | 50 mΩ (typical at 25 °C) | — |
| Continuous Load Current | 4 A | — |
| Number of Channels | 1 (Single channel) | — |
| Topologie | Low-Side Switch (1:1) | — |
| Supply Voltage (Vbb) | [DATA_NEEDED: Vbb max rating] | — |
| Load Voltage | 12 V automotive nominal | — |
| ESD Protection | Yes (on IN pin / Source / Ground) | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Thermal Protection | Auto-restart overtemperature shutdown | — |
| Strombegrenzung | [DATA_NEEDED: ILIM value] | — |
| Gehäuse | PG-TDSO-8-31 (TDSO8-31) | PG-TO252-3-313 (DPAK, SC-63) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: Tj range] | -40°C to +150°C |
| RoHS-Status | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified (HITFET +12V family) | — |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| Wärmewiderstand, Sperrschicht-Umgebung | — | [DATA_NEEDED: theta_JA value] |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| Status Flag Output | — | Yes (fault feedback) |
| MSL-Level | — | [DATA_NEEDED: MSL moisture sensitivity level] |