BTS3050EJXUMA1 vs BTS3125TFATMA1 比較
詳細な並列比較: BTS3050EJXUMA1 メーカー: Infineon および BTS3125TFATMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | BTS3050EJXUMA1 | BTS3125TFATMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.86 | $0.54 |
| Product Type | Smart Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| Technology | N-Channel Vertical Power MOSFET (HITFET +12V) | — |
| On-State Resistance (RDS(on)) | 50 mΩ (typical at 25 °C) | — |
| Continuous Load Current | 4 A | — |
| Number of Channels | 1 (Single channel) | — |
| トポロジー | Low-Side Switch (1:1) | — |
| Supply Voltage (Vbb) | [DATA_NEEDED: Vbb max rating] | — |
| Load Voltage | 12 V automotive nominal | — |
| ESD Protection | Yes (on IN pin / Source / Ground) | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Thermal Protection | Auto-restart overtemperature shutdown | — |
| 電流制限 | [DATA_NEEDED: ILIM value] | — |
| パッケージ | PG-TDSO-8-31 (TDSO8-31) | PG-TO252-3-313 (DPAK, SC-63) |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度範囲 | [DATA_NEEDED: Tj range] | -40°C to +150°C |
| RoHS ステータス | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified (HITFET +12V family) | — |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| 熱抵抗、接合-周囲間 | — | [DATA_NEEDED: theta_JA value] |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| Status Flag Output | — | Yes (fault feedback) |
| MSLレベル | — | [DATA_NEEDED: MSL moisture sensitivity level] |