BTS3125TFATMA1 vs BTS3028SDRATMA1 Vergleich
Detaillierter Direktvergleich von BTS3125TFATMA1 von Infineon und BTS3028SDRATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3125TFATMA1 | BTS3028SDRATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,54 | $0,92 |
| Product Type | Single-channel N-channel low-side smart power switch | Smart Low-Side Power Switch |
| Load Current (continuous) | 2 A | — |
| Load Current (pulsed) | [DATA_NEEDED: pulsed drain current limit] | — |
| RDS(on) typical | 250 mΩ at 5 V Vbb | — |
| Supply Voltage (Vbb, nominal) | 5 V | — |
| Supply Voltage (Vbb, operating) | 5 V to 28 V | — |
| Load Dump Transient Protection | 40 V | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| On-State Resistance (max) | [DATA_NEEDED: maximum RDS(on) over temp] | — |
| Wärmewiderstand, Sperrschicht-Umgebung | [DATA_NEEDED: theta_JA value] | — |
| Betriebstemperaturbereich | -40°C to +150°C | — |
| Over-temperature Shutdown | ~150°C with auto-restart | — |
| Short-Circuit Protection | Yes, current-limited | — |
| Over-voltage Protection | Yes (clamping at 40 V) | — |
| ESD Protection | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) | — |
| Status Flag Output | Yes (fault feedback) | — |
| Gehäuse | PG-TO252-3-313 (DPAK, SC-63) | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | 1:1 N-Channel, single channel |
| Ausgangsstrom (max.) | — | 5 A |
| On-Resistance RDS(ON) | — | 28 mΩ (typ.) |
| Load Voltage (max) | — | 60 V (load-dump rated) |
| Betriebsversorgungsspannung | — | 5 V to 28 V (typ. 13.5 V) |
| Logic Input Voltage (IN) | — | Logic-level, 3.3 V/5 V compatible |
| Betriebstemperatur | — | -40 °C to +150 °C (junction) |
| Protection Features | — | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss |
| Status Output | — | Open-drain diagnostic flag |
| Automotive Qualification | — | AEC-Q100 |