BTS3125TFATMA1 vs BTS3028SDRATMA1 Comparación
Comparación detallada lado a lado de BTS3125TFATMA1 por Infineon y BTS3028SDRATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3125TFATMA1 | BTS3028SDRATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,54 | $0,92 |
| Product Type | Single-channel N-channel low-side smart power switch | Smart Low-Side Power Switch |
| Load Current (continuous) | 2 A | — |
| Load Current (pulsed) | [DATA_NEEDED: pulsed drain current limit] | — |
| RDS(on) typical | 250 mΩ at 5 V Vbb | — |
| Supply Voltage (Vbb, nominal) | 5 V | — |
| Supply Voltage (Vbb, operating) | 5 V to 28 V | — |
| Load Dump Transient Protection | 40 V | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| On-State Resistance (max) | [DATA_NEEDED: maximum RDS(on) over temp] | — |
| Resistencia térmica, unión a ambiente | [DATA_NEEDED: theta_JA value] | — |
| Rango de temperatura de funcionamiento | -40°C to +150°C | — |
| Over-temperature Shutdown | ~150°C with auto-restart | — |
| Short-Circuit Protection | Yes, current-limited | — |
| Over-voltage Protection | Yes (clamping at 40 V) | — |
| ESD Protection | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) | — |
| Status Flag Output | Yes (fault feedback) | — |
| Encapsulado | PG-TO252-3-313 (DPAK, SC-63) | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Estado RoHS | Compliant | Compliant |
| Topología | — | 1:1 N-Channel, single channel |
| Corriente de salida (máx.) | — | 5 A |
| On-Resistance RDS(ON) | — | 28 mΩ (typ.) |
| Load Voltage (max) | — | 60 V (load-dump rated) |
| Tensión de alimentación de funcionamiento | — | 5 V to 28 V (typ. 13.5 V) |
| Logic Input Voltage (IN) | — | Logic-level, 3.3 V/5 V compatible |
| Temperatura de funcionamiento | — | -40 °C to +150 °C (junction) |
| Protection Features | — | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss |
| Status Output | — | Open-drain diagnostic flag |
| Automotive Qualification | — | AEC-Q100 |