BTS426L1E3062AAUMA1 vs BTS426L1E3062ABUMA1 Vergleich
Detaillierter Direktvergleich von BTS426L1E3062AAUMA1 von Infineon und BTS426L1E3062ABUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS426L1E3062ABUMA1 - 5.8A 12V Smart High-Side Switch | Infineon
BTS426L1E3062ABUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS426L1E3062AAUMA1 | BTS426L1E3062ABUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,35 | $2,85 |
| Manufacturer | Infineon Technologies | — |
| Product Family | Classic PROFET 12V | — |
| Funktion | Smart High-Side Power Switch | — |
| Topologie | N-Channel Vertical Power FET with Charge Pump | 1:1 N-Channel High-Side |
| Anzahl der Ausgänge | 1 | — |
| Ausgangskonfiguration | High-Side | — |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | Yes (status feedback) |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Gehäuse | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TO263-5-2 (D2PAK, 4 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | — |
| RoHS-Status | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | AEC-Q100 qualified (PROFET 12V family) |
| Product Type | — | Smart High-Side Power Switch (PROFET) |
| Manufacturer Series | — | Classic PROFET 12V |
| Typical R_DS(on) | — | 5 mΩ |
| Maximaler Ausgangsstrom | — | 5.8 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | [DATA_NEEDED: Vs operating range] |
| Betriebstemperatur | — | -40 °C to +150 °C (TJ) |
| Fault Protection | — | Current Limiting (Fixed), Open Load Detection, Overtemperature, Short Circuit, Overvoltage (load dump), Reverse Battery |
| Lead-Free / RoHS | — | Yes (per distributor listings) |
| Demagnetization | — | Fast (designed for inductive loads) |