BTS426L1E3062AAUMA1 vs BTS426L1E3062ABUMA1 Comparaison
Comparaison détaillée côte à côte de BTS426L1E3062AAUMA1 par Infineon et BTS426L1E3062ABUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS426L1E3062ABUMA1 - 5.8A 12V Smart High-Side Switch | Infineon
BTS426L1E3062ABUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS426L1E3062AAUMA1 | BTS426L1E3062ABUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,35 | $2,85 |
| Manufacturer | Infineon Technologies | — |
| Product Family | Classic PROFET 12V | — |
| Fonction | Smart High-Side Power Switch | — |
| Topologie | N-Channel Vertical Power FET with Charge Pump | 1:1 N-Channel High-Side |
| Nombre de sorties | 1 | — |
| Configuration de sortie | High-Side | — |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | Yes (status feedback) |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Boîtier | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TO263-5-2 (D2PAK, 4 leads + tab) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | — |
| Statut RoHS | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | AEC-Q100 qualified (PROFET 12V family) |
| Product Type | — | Smart High-Side Power Switch (PROFET) |
| Manufacturer Series | — | Classic PROFET 12V |
| Typical R_DS(on) | — | 5 mΩ |
| Courant de sortie maximal | — | 5.8 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | [DATA_NEEDED: Vs operating range] |
| Température de fonctionnement | — | -40 °C to +150 °C (TJ) |
| Fault Protection | — | Current Limiting (Fixed), Open Load Detection, Overtemperature, Short Circuit, Overvoltage (load dump), Reverse Battery |
| Lead-Free / RoHS | — | Yes (per distributor listings) |
| Demagnetization | — | Fast (designed for inductive loads) |