BTS426L1E3062AAUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von BTS426L1E3062AAUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS426L1E3062AAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,35 | $3,18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | Classic PROFET 12V | — |
| Funktion | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | N-Channel Vertical Power FET with Charge Pump | — |
| Anzahl der Ausgänge | 1 | — |
| Ausgangskonfiguration | High-Side | High-side, N-channel MOSFET |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | — |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Gehäuse | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TSDSO-14 (exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | -40 °C to +150 °C junction |
| RoHS-Status | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |