BTS426L1E3062AAUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS426L1E3062AAUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS426L1E3062AAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,35 | $3,18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | Classic PROFET 12V | — |
| Fonction | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | N-Channel Vertical Power FET with Charge Pump | — |
| Nombre de sorties | 1 | — |
| Configuration de sortie | High-Side | High-side, N-channel MOSFET |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | — |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Boîtier | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | -40 °C to +150 °C junction |
| Statut RoHS | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |