BTS428L2 vs BTS500201TADATMA1 Vergleich
Detaillierter Direktvergleich von BTS428L2 von Infineon und BTS500201TADATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS428L2 | BTS500201TADATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,82 | $1,35 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | — |
| Topologie | Single-channel high-side N-channel MOSFET with charge pump | High-Side Power Switch (1:1 N-Channel) |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | [DATA_NEEDED: typical RDS(on) in mΩ] |
| Number of Channels | 1 | — |
| Status Feedback | Yes (dedicated status pin) | — |
| Überstromschutz | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | [DATA_NEEDED: standby current in uA] |
| Betriebstemperaturbereich | -40 °C to +150 °C | [DATA_NEEDED: junction/ambient operating range] |
| Gehäuse | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | TO-263-7-10 (PG-TO-263-7-10) |
| Montageart | Surface Mount | Surface Mount (Gull-wing) |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Product Family | — | HIC-PROFET |
| Output Current (Continuous) | — | 29 A |
| Nominal Supply Voltage | — | 13.5 V |
| Operating Voltage Range | — | [DATA_NEEDED: full operating voltage range] |
| Load Dump Withstand | — | [DATA_NEEDED: load dump voltage rating] |
| Strombegrenzung | — | [DATA_NEEDED: current limit threshold in A] |
| Overtemperature Shutdown | — | [DATA_NEEDED: junction shutdown temperature in °C] |
| Diagnostic Output | — | Open-drain status pin |
| Input Pin | — | Logic-level control (active high) |
| Automotive Grade | — | AEC-Q100 Qualified |
| RoHS-Status | — | Compliant |