BTS428L2 vs BTS500201TADATMA1 Comparaison
Comparaison détaillée côte à côte de BTS428L2 par Infineon et BTS500201TADATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS428L2 | BTS500201TADATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,82 | $1,35 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | — |
| Topologie | Single-channel high-side N-channel MOSFET with charge pump | High-Side Power Switch (1:1 N-Channel) |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | [DATA_NEEDED: typical RDS(on) in mΩ] |
| Number of Channels | 1 | — |
| Status Feedback | Yes (dedicated status pin) | — |
| Protection contre les surintensités | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | [DATA_NEEDED: standby current in uA] |
| Plage de température de fonctionnement | -40 °C to +150 °C | [DATA_NEEDED: junction/ambient operating range] |
| Boîtier | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | TO-263-7-10 (PG-TO-263-7-10) |
| Type de montage | Surface Mount | Surface Mount (Gull-wing) |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Product Family | — | HIC-PROFET |
| Output Current (Continuous) | — | 29 A |
| Nominal Supply Voltage | — | 13.5 V |
| Operating Voltage Range | — | [DATA_NEEDED: full operating voltage range] |
| Load Dump Withstand | — | [DATA_NEEDED: load dump voltage rating] |
| Limitation de courant | — | [DATA_NEEDED: current limit threshold in A] |
| Overtemperature Shutdown | — | [DATA_NEEDED: junction shutdown temperature in °C] |
| Diagnostic Output | — | Open-drain status pin |
| Input Pin | — | Logic-level control (active high) |
| Automotive Grade | — | AEC-Q100 Qualified |
| Statut RoHS | — | Compliant |