BTS428L2ATMA1 vs BTS3035TFATMA1 Vergleich
Detaillierter Direktvergleich von BTS428L2ATMA1 von Infineon und BTS3035TFATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS428L2ATMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,45 | $0,61 |
| Product Type | Smart High-Side Power Switch | Low-Side Power Switch |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | N-Channel MOSFET |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | CMOS Logic Level |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Betriebsversorgungsspannung | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-313 (DPAK) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: min/max] | -40C to +150C (junction) |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| MSL-Level | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS-Status | — | Compliant |
| Automotive Grade | — | AEC-Q100 qualified |