BTS428L2ATMA1 vs BTS3035TFATMA1 Comparação
Comparação detalhada lado a lado de BTS428L2ATMA1 por Infineon e BTS3035TFATMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS428L2ATMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,45 | $0,61 |
| Product Type | Smart High-Side Power Switch | Low-Side Power Switch |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | N-Channel MOSFET |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | CMOS Logic Level |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Tensão de alimentação de operação | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Encapsulamento | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-313 (DPAK) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Faixa de temperatura de operação | [DATA_NEEDED: min/max] | -40C to +150C (junction) |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Nível MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Status RoHS | — | Compliant |
| Automotive Grade | — | AEC-Q100 qualified |