BTS428L2ATMA1 vs BTS3050TFATMA1 Vergleich
Detaillierter Direktvergleich von BTS428L2ATMA1 von Infineon und BTS3050TFATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS428L2ATMA1 | BTS3050TFATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,45 | $1,02 |
| Product Type | Smart High-Side Power Switch | — |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | — |
| Number of Channels | 1 | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Betriebsversorgungsspannung | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-313 (TO-252 / DPAK) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: min/max] | — |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Part Number | — | BTS3050TFATMA1 |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | HITFET Smart Low-Side Switch |
| Switch Type | — | N-Channel Low-Side Smart Power Switch |
| Anzahl der Ausgänge | — | 1 |
| RDS(on) (typ) | — | 44 mOhm at 25 C |
| Continuous Drain Current | — | 4 A |
| Load Voltage (max) | — | 5.5 V |
| Logic Input | — | CMOS compatible, logic-level |
| Status Output | — | Yes (fault feedback) |
| Protection Features | — | Over-current, Over-temperature, Over-voltage, ESD |
| Betriebstemperatur | — | -40 C to +150 C (junction) |
| AEC-Q100 | — | Qualified |
| RoHS | — | Compliant |