BTS428L2ATMA1 vs BTS3050TFATMA1 Comparación
Comparación detallada lado a lado de BTS428L2ATMA1 por Infineon y BTS3050TFATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS428L2ATMA1 | BTS3050TFATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,45 | $1,02 |
| Product Type | Smart High-Side Power Switch | — |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | — |
| Number of Channels | 1 | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Tensión de alimentación de funcionamiento | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Encapsulado | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-313 (TO-252 / DPAK) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: min/max] | — |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Part Number | — | BTS3050TFATMA1 |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | HITFET Smart Low-Side Switch |
| Switch Type | — | N-Channel Low-Side Smart Power Switch |
| Número de salidas | — | 1 |
| RDS(on) (typ) | — | 44 mOhm at 25 C |
| Continuous Drain Current | — | 4 A |
| Load Voltage (max) | — | 5.5 V |
| Logic Input | — | CMOS compatible, logic-level |
| Status Output | — | Yes (fault feedback) |
| Protection Features | — | Over-current, Over-temperature, Over-voltage, ESD |
| Temperatura de funcionamiento | — | -40 C to +150 C (junction) |
| AEC-Q100 | — | Qualified |
| RoHS | — | Compliant |