BTS441RGATMA1 vs ITS4040DEPDXUMA1 Vergleich
Detaillierter Direktvergleich von BTS441RGATMA1 von Infineon und ITS4040DEPDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS441RGATMA1 | ITS4040DEPDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,21 | $2,12 |
| Manufacturer | Infineon Technologies AG | — |
| Part Number | BTS441RGATMA1 | — |
| Switch Type | 1:1 N-Channel High-Side | — |
| Anzahl der Ausgänge | 1 | — |
| Continuous Load Current | 17 A | — |
| Topologie | Smart High-Side Switch | 1:1 High-Side (N-Channel MOSFET, two channels) |
| Input Type | CMOS-compatible, ground referenced | — |
| Diagnostics | Yes (fault feedback) | — |
| Technology | Smart SIPMOS (N-channel vertical FET + charge pump) | — |
| Gehäuse | PG-TO263-5-2 (TO-263-5) | PG-TSDSO-14 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Anzahl der Pins | 5 | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb range, e.g. 6V-42V] | -0.3 V to 45 V (load-dump tolerant) |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) at 25 C] | — |
| Over-Current Protection | Yes (integrated) | — |
| Thermal Protection | Yes (overtemperature shutdown) | — |
| Over-Voltage Protection | Yes (inductive load clamping) | — |
| Automotive Qualified | Yes (AEC-Q100 automotive grade) | — |
| RoHS-Status | Compliant | Compliant |
| Tape and Reel Quantity | 1000 (per reel) | — |
| Product Type | — | Dual-Channel Smart High-Side Power Switch (PROFET) |
| Number of Channels | — | 2 (independent) |
| Typical On-State Resistance per Channel (RDS(ON)) | — | 60 mΩ at TJ = 125 °C |
| Continuous Load Current per Channel | — | >2 A |
| Combined Peak Capability | — | 4.1 A (per datasheet summary) |
| Per-Channel Current Limit (typ.) | — | 2.6 A |
| On/Off Input Interface | — | Logic-level GPIO compatible (3.3 V / 5 V) |
| Diagnostic Output | — | Current-sense (IS) pin, proportional to load current |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery |
| Operating Temperature (TJ) | — | -40 °C to +150 °C (typical automotive PROFET range) |