BTS441RGATMA1 vs ITS4040DEPDXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS441RGATMA1 par Infineon et ITS4040DEPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS441RGATMA1 | ITS4040DEPDXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,21 | $2,12 |
| Manufacturer | Infineon Technologies AG | — |
| Part Number | BTS441RGATMA1 | — |
| Switch Type | 1:1 N-Channel High-Side | — |
| Nombre de sorties | 1 | — |
| Continuous Load Current | 17 A | — |
| Topologie | Smart High-Side Switch | 1:1 High-Side (N-Channel MOSFET, two channels) |
| Input Type | CMOS-compatible, ground referenced | — |
| Diagnostics | Yes (fault feedback) | — |
| Technology | Smart SIPMOS (N-channel vertical FET + charge pump) | — |
| Boîtier | PG-TO263-5-2 (TO-263-5) | PG-TSDSO-14 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Nombre de broches | 5 | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb range, e.g. 6V-42V] | -0.3 V to 45 V (load-dump tolerant) |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) at 25 C] | — |
| Over-Current Protection | Yes (integrated) | — |
| Thermal Protection | Yes (overtemperature shutdown) | — |
| Over-Voltage Protection | Yes (inductive load clamping) | — |
| Automotive Qualified | Yes (AEC-Q100 automotive grade) | — |
| Statut RoHS | Compliant | Compliant |
| Tape and Reel Quantity | 1000 (per reel) | — |
| Product Type | — | Dual-Channel Smart High-Side Power Switch (PROFET) |
| Number of Channels | — | 2 (independent) |
| Typical On-State Resistance per Channel (RDS(ON)) | — | 60 mΩ at TJ = 125 °C |
| Continuous Load Current per Channel | — | >2 A |
| Combined Peak Capability | — | 4.1 A (per datasheet summary) |
| Per-Channel Current Limit (typ.) | — | 2.6 A |
| On/Off Input Interface | — | Logic-level GPIO compatible (3.3 V / 5 V) |
| Diagnostic Output | — | Current-sense (IS) pin, proportional to load current |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery |
| Operating Temperature (TJ) | — | -40 °C to +150 °C (typical automotive PROFET range) |