BTS462TATMA1 vs BTS3046SDRATMA1 Vergleich
Detaillierter Direktvergleich von BTS462TATMA1 von Infineon und BTS3046SDRATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS462TATMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,38 | $0,74 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 1 | — |
| Ausgangskonfiguration | High-Side | — |
| Output Current (Continuous) | 3.5 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) in mOhm] | — |
| Supply Voltage Range (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | Yes | — |
| Overvoltage Protection | Yes | — |
| Overload / Current Limit | Yes | — |
| Short-Circuit Protection | Yes | — |
| Thermisches Abschalten | Yes (with auto-restart) | — |
| Undervoltage Shutdown | Yes | — |
| Fast Demagnetization | Yes (for inductive loads) | — |
| Diagnostic Output (STATUS pin) | Yes | — |
| Betriebstemperatur | -40 C to +150 C (junction) | — |
| Gehäuse | PG-TO252-5 (DPAK-5) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant | — |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | — | 4.5 V to 42 V |
| Load Type | — | Low-side switch (ground-referenced load) |
| Betriebstemperaturbereich | — | -40 C to +150 C |
| Protection Features | — | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |