BTS462TATMA1 vs BTS3046SDRATMA1 Comparaison
Comparaison détaillée côte à côte de BTS462TATMA1 par Infineon et BTS3046SDRATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS462TATMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,38 | $0,74 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 1 | — |
| Configuration de sortie | High-Side | — |
| Output Current (Continuous) | 3.5 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) in mOhm] | — |
| Supply Voltage Range (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | Yes | — |
| Overvoltage Protection | Yes | — |
| Overload / Current Limit | Yes | — |
| Short-Circuit Protection | Yes | — |
| Arrêt thermique | Yes (with auto-restart) | — |
| Undervoltage Shutdown | Yes | — |
| Fast Demagnetization | Yes (for inductive loads) | — |
| Diagnostic Output (STATUS pin) | Yes | — |
| Température de fonctionnement | -40 C to +150 C (junction) | — |
| Boîtier | PG-TO252-5 (DPAK-5) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant | — |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | — | 4.5 V to 42 V |
| Load Type | — | Low-side switch (ground-referenced load) |
| Plage de température de fonctionnement | — | -40 C to +150 C |
| Protection Features | — | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |