BTS462TATMA1 vs TLE9104SHXUMA1 Vergleich
Detaillierter Direktvergleich von BTS462TATMA1 von Infineon und TLE9104SHXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS462TATMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,38 | $3,72 |
| Manufacturer | Infineon Technologies | — |
| Product Type | Smart High-Side Power Switch | Multi-Channel Low-Side Power Switch |
| Number of Channels | 1 | 4 |
| Ausgangskonfiguration | High-Side | — |
| Output Current (Continuous) | 3.5 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) in mOhm] | — |
| Supply Voltage Range (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | Yes | — |
| Overvoltage Protection | Yes | — |
| Overload / Current Limit | Yes | — |
| Short-Circuit Protection | Yes | — |
| Thermisches Abschalten | Yes (with auto-restart) | — |
| Undervoltage Shutdown | Yes | — |
| Fast Demagnetization | Yes (for inductive loads) | — |
| Diagnostic Output (STATUS pin) | Yes | — |
| Betriebstemperatur | -40 C to +150 C (junction) | -40 °C to +150 °C (junction) |
| Gehäuse | PG-TO252-5 (DPAK-5) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | MSL3 (per JEDEC J-STD-020) |
| RoHS-Status | Compliant | — |
| Load Current per Channel | — | 3 A (continuous) |
| Topologie | — | 1:1 N-Channel Low-Side Switch |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Protection Features | — | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |