BTS462TATMA1 vs TLE9104SHXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS462TATMA1 par Infineon et TLE9104SHXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS462TATMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,38 | $3,72 |
| Manufacturer | Infineon Technologies | — |
| Product Type | Smart High-Side Power Switch | Multi-Channel Low-Side Power Switch |
| Number of Channels | 1 | 4 |
| Configuration de sortie | High-Side | — |
| Output Current (Continuous) | 3.5 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) in mOhm] | — |
| Supply Voltage Range (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | Yes | — |
| Overvoltage Protection | Yes | — |
| Overload / Current Limit | Yes | — |
| Short-Circuit Protection | Yes | — |
| Arrêt thermique | Yes (with auto-restart) | — |
| Undervoltage Shutdown | Yes | — |
| Fast Demagnetization | Yes (for inductive loads) | — |
| Diagnostic Output (STATUS pin) | Yes | — |
| Température de fonctionnement | -40 C to +150 C (junction) | -40 °C to +150 °C (junction) |
| Boîtier | PG-TO252-5 (DPAK-5) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | MSL3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | — |
| Load Current per Channel | — | 3 A (continuous) |
| Topologie | — | 1:1 N-Channel Low-Side Switch |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Protection Features | — | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |