BTS500801TEAAUMA1 vs BTS3011TEATMA1 Vergleich
Detaillierter Direktvergleich von BTS500801TEAAUMA1 von Infineon und BTS3011TEATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS500801TEAAUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,74 | $0,51 |
| Product Family | Classic PROFET (smart high-side switch) | — |
| Topologie | 1:1 N-Channel high-side | — |
| Nominal Supply Voltage | 12 V | — |
| Load Supply Voltage Range | 4.5 V to 28 V | — |
| Continuous Load Current | 10 A | 10 A |
| On-State Resistance (RDS(on)) | 10 milliohms (typical) | — |
| Ausgangskonfiguration | High-side | — |
| Number of Channels | 1 | 1 |
| Fault Protection | Current limiting, over-temperature, over-voltage, reverse battery, ground loss, ESD | — |
| Diagnostic Output | Current sense (IS pin) | Open-drain status feedback pin |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4+Tab) | PG-TO252-5 (DPAK-5) |
| Montageart | Surface Mount | Surface Mount |
| Packaging | Tape & Reel | — |
| Automotive Qualified | Yes (AEC-Q100 target application) | — |
| RoHS-Status | Compliant | Compliant |
| Power Transistor Technology | N-channel vertical power MOSFET with charge pump | — |
| Product Type | — | Smart Low-Side Power Switch |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Anzahl der Pins | — | 5 (4 + Tab) |
| Betriebs-Sperrschichttemperatur | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |