BTS5014SDAAUMA1 vs BTS4130QGAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS5014SDAAUMA1 von Infineon und BTS4130QGAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS5014SDAAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,55 | $1,86 |
| Product Type | Smart High-Side Power Switch | Quad Smart High-Side Power Switch |
| Number of Channels | 1 | 4 |
| Topologie | N-Channel vertical power MOSFET with charge pump | High-Side N-Channel MOSFET with charge pump |
| Nominal Load Current | 6 A | — |
| Betriebsversorgungsspannung | 5 V to 28 V (load-dump tolerant to 41 V) | 6 V to 18 V (extended to 28 V transient) |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Strombegrenzung | [DATA_NEEDED: ICL typical] | — |
| Betriebstemperaturbereich | -40 C to +150 C (junction) | -40 C to +150 C junction |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Montageart | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| RoHS-Status | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Output | — | Status feedback pin |
| MSL-Level | — | 3 (per JEDEC J-STD-020) |