BTS5014SDAAUMA1 vs BTS4130QGAXUMA1 Comparación
Comparación detallada lado a lado de BTS5014SDAAUMA1 por Infineon y BTS4130QGAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS5014SDAAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,55 | $1,86 |
| Product Type | Smart High-Side Power Switch | Quad Smart High-Side Power Switch |
| Number of Channels | 1 | 4 |
| Topología | N-Channel vertical power MOSFET with charge pump | High-Side N-Channel MOSFET with charge pump |
| Nominal Load Current | 6 A | — |
| Tensión de alimentación de funcionamiento | 5 V to 28 V (load-dump tolerant to 41 V) | 6 V to 18 V (extended to 28 V transient) |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Limitación de corriente | [DATA_NEEDED: ICL typical] | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C (junction) | -40 C to +150 C junction |
| Encapsulado | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| Estado RoHS | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Output | — | Status feedback pin |
| Nivel MSL | — | 3 (per JEDEC J-STD-020) |