BTS51202EKAXUMA1 vs BTG70501EPLXUMA1 Vergleich
Detaillierter Direktvergleich von BTS51202EKAXUMA1 von Infineon und BTG70501EPLXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS51202EKAXUMA1 | BTG70501EPLXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,68 | $1,45 |
| Topologie | Dual High-Side Switch (2 channels) | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 2 | 1 |
| On-State Resistance (RDS(on)) | 120 mΩ (typical per channel) | — |
| Continuous Output Current | 2 A per channel (typical 2.5 A) | — |
| Operating Voltage (Vbb) | 8 V to 18 V | — |
| Load Type | Lamps up to 1×10 W, LEDs, resistive/inductive loads | — |
| Gehäuse | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 °C to +150 °C | — |
| Maximum Power Dissipation | 1800 mW | — |
| Integrated Protection | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery | — |
| Diagnostic Output | Yes (status feedback pin) | — |
| Charge Pump | Integrated | — |
| Automotive Qualified | Yes | — |
| RoHS-Status | Compliant | Compliant |
| Switch Type | — | High-Side Power Switch (PROFET +2 12V) |
| Input / Output Ratio | — | 1:1 |
| Ausgangskonfiguration | — | N-Channel High-Side |
| Current Limit (Typ.) | — | 3 A |
| Supply Voltage Vcc Range | — | 2.7 V to 28 V |
| Load-Dump Withstand | — | [DATA_NEEDED: load-dump transient rating] |
| On-State Resistance (Typ) | — | [DATA_NEEDED: Rdson value] |
| Operating Temperature (Tj) | — | -40 C to +150 C |
| Diagnostic Functions | — | Open-load, short-to-GND, short-to-Vbat, overtemperature |
| Current Limit Switch (CLS) Mode | — | Yes (for ADAS / power distribution) |
| Qualification | — | AEC-Q100 (automotive) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |