BTS51202EKAXUMA1 vs BTG70501EPLXUMA1 Comparación
Comparación detallada lado a lado de BTS51202EKAXUMA1 por Infineon y BTG70501EPLXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS51202EKAXUMA1 | BTG70501EPLXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,68 | $1,45 |
| Topología | Dual High-Side Switch (2 channels) | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 2 | 1 |
| On-State Resistance (RDS(on)) | 120 mΩ (typical per channel) | — |
| Continuous Output Current | 2 A per channel (typical 2.5 A) | — |
| Operating Voltage (Vbb) | 8 V to 18 V | — |
| Load Type | Lamps up to 1×10 W, LEDs, resistive/inductive loads | — |
| Encapsulado | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | -40 °C to +150 °C | — |
| Maximum Power Dissipation | 1800 mW | — |
| Integrated Protection | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery | — |
| Diagnostic Output | Yes (status feedback pin) | — |
| Charge Pump | Integrated | — |
| Automotive Qualified | Yes | — |
| Estado RoHS | Compliant | Compliant |
| Switch Type | — | High-Side Power Switch (PROFET +2 12V) |
| Input / Output Ratio | — | 1:1 |
| Configuración de salida | — | N-Channel High-Side |
| Current Limit (Typ.) | — | 3 A |
| Supply Voltage Vcc Range | — | 2.7 V to 28 V |
| Load-Dump Withstand | — | [DATA_NEEDED: load-dump transient rating] |
| On-State Resistance (Typ) | — | [DATA_NEEDED: Rdson value] |
| Operating Temperature (Tj) | — | -40 C to +150 C |
| Diagnostic Functions | — | Open-load, short-to-GND, short-to-Vbat, overtemperature |
| Current Limit Switch (CLS) Mode | — | Yes (for ADAS / power distribution) |
| Qualification | — | AEC-Q100 (automotive) |
| Nivel MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |