BTS52001ENAXUMA1 vs BTS70082EPAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS52001ENAXUMA1 von Infineon und BTS70082EPAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS52001ENAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,82 | $2,05 |
| Product Type | Smart High-Side Power Switch | — |
| Family | Classic PROFET 12V | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 1 | 2 |
| On-State Resistance (RDS(on)) | 200 mΩ (typical) | — |
| Continuous Load Current | 1.5 A | — |
| Nominal Operating Voltage | 12 V | — |
| Operating Voltage Range | 4.5 V to 28 V (load-dump tolerant) | — |
| Input Control | Logic-level, active-high | — |
| Diagnostic Output | Yes (status feedback) | Current-sense (IS) pin, analog/digital |
| Open-Load Detection | Yes (in OFF state) | — |
| Current Limitation | Yes (integrated) | — |
| Over-Temperature Protection | Yes (with auto-restart) | — |
| Over-Voltage Protection | Yes (load-dump robust) | — |
| Gehäuse | PG-TDSO-8-31 (Exposed Pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 °C to +150 °C | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Target Load | 1× R10W 12V lamp, LEDs | — |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Switch Type | — | High-side N-channel MOSFET switch |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Betriebs-Sperrschichttemperatur | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| MSL-Level | — | MSL3 (per JEDEC J-STD-020) |
| RoHS-Status | — | Compliant |