BTS52001ENAXUMA1 vs BTS70082EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS52001ENAXUMA1 par Infineon et BTS70082EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS52001ENAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,82 | $2,05 |
| Product Type | Smart High-Side Power Switch | — |
| Family | Classic PROFET 12V | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 1 | 2 |
| On-State Resistance (RDS(on)) | 200 mΩ (typical) | — |
| Continuous Load Current | 1.5 A | — |
| Nominal Operating Voltage | 12 V | — |
| Operating Voltage Range | 4.5 V to 28 V (load-dump tolerant) | — |
| Input Control | Logic-level, active-high | — |
| Diagnostic Output | Yes (status feedback) | Current-sense (IS) pin, analog/digital |
| Open-Load Detection | Yes (in OFF state) | — |
| Current Limitation | Yes (integrated) | — |
| Over-Temperature Protection | Yes (with auto-restart) | — |
| Over-Voltage Protection | Yes (load-dump robust) | — |
| Boîtier | PG-TDSO-8-31 (Exposed Pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +150 °C | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Target Load | 1× R10W 12V lamp, LEDs | — |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Switch Type | — | High-side N-channel MOSFET switch |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Température de jonction en fonctionnement | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| Niveau MSL | — | MSL3 (per JEDEC J-STD-020) |
| Statut RoHS | — | Compliant |