BTS5215LAUMA1 vs TPS4H000BQPWPRQ1 Vergleich
Detaillierter Direktvergleich von BTS5215LAUMA1 von Infineon und TPS4H000BQPWPRQ1 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS5215LAUMA1 | TPS4H000BQPWPRQ1 |
|---|---|---|
| Marke | Infineon | Texas Instruments |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,18 | $2,15 |
| Product Type | Smart High-Side Power Switch | Quad-channel smart high-side switch |
| Number of Channels | 2 | 4 |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | — |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Gehäuse | PG-DSO-12-9 | 20-pin HTSSOP (PWP) with exposed pad |
| Betriebstemperatur | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | — |
| RoHS-Status | Compliant | Compliant |
| Supply Voltage Range | — | 3.4 V to 40 V |
| On-Resistance (per channel) | — | 1000 mOhm (typical) |
| Rated Output Current (per channel) | — | 750 mA |
| Strombegrenzung | — | External, adjustable |
| Current Sense | — | High-accuracy, multiplexed via CS pin |
| Diagnostics | — | Open-load, short-circuit, thermal, full fault reporting |
| Control Inputs | — | IN1, IN2, IN3, IN4, SEL |
| Qualification | — | AEC-Q100 qualified (automotive) |
| Montageart | — | Surface Mount |
| Power FET Type | — | Integrated NMOS with internal charge pump |
| Target Rails | — | 12-V and 24-V automotive/industrial |
| Protection | — | Overload, thermal shutdown, output clamp |