BTS5215LAUMA1 vs TPS4H000BQPWPRQ1 Comparaison
Comparaison détaillée côte à côte de BTS5215LAUMA1 par Infineon et TPS4H000BQPWPRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS5215LAUMA1 | TPS4H000BQPWPRQ1 |
|---|---|---|
| Marque | Infineon | Texas Instruments |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,18 | $2,15 |
| Product Type | Smart High-Side Power Switch | Quad-channel smart high-side switch |
| Number of Channels | 2 | 4 |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | — |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Boîtier | PG-DSO-12-9 | 20-pin HTSSOP (PWP) with exposed pad |
| Température de fonctionnement | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | — |
| Statut RoHS | Compliant | Compliant |
| Supply Voltage Range | — | 3.4 V to 40 V |
| On-Resistance (per channel) | — | 1000 mOhm (typical) |
| Rated Output Current (per channel) | — | 750 mA |
| Limitation de courant | — | External, adjustable |
| Current Sense | — | High-accuracy, multiplexed via CS pin |
| Diagnostics | — | Open-load, short-circuit, thermal, full fault reporting |
| Control Inputs | — | IN1, IN2, IN3, IN4, SEL |
| Qualification | — | AEC-Q100 qualified (automotive) |
| Type de montage | — | Surface Mount |
| Power FET Type | — | Integrated NMOS with internal charge pump |
| Target Rails | — | 12-V and 24-V automotive/industrial |
| Protection | — | Overload, thermal shutdown, output clamp |