BTS700121ESPXUMA2 vs BTS70021EPPXUMA1 Vergleich
Detaillierter Direktvergleich von BTS700121ESPXUMA2 von Infineon und BTS70021EPPXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 ✓ AktivInfineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS700121ESPXUMA2 | BTS70021EPPXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,62 | $1,32 |
| Funktion | Power Switch / Driver 1:1 N-Channel | — |
| Topologie | High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Continuous Load Current | 31.3 A | — |
| Family | PROFET (Protected FET) | — |
| Nominal Supply Voltage | 13.5 V | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Ron typ @ 25 C] | — |
| Number of Channels | 1 | — |
| Gehäuse | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) | PG-TSDSO-14-22 (exposed pad) |
| Number of Terminals | 24 | — |
| Terminal Pitch | 0.65 mm | — |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +150 C | -40 C to +150 C junction |
| Max Junction Temperature | 150 C | — |
| Protection Features | Overload, short-circuit, over-temperature, reverse battery, ground loss | — |
| Diagnostic Output | Analog current sense (IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | Yes (on-state and off-state) |
| RoHS-Status | Compliant | Compliant (Green Product) |
| Product Family | — | PROFET+2 12V |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Qualification | — | AEC-Q100 automotive qualified |