BTS700121ESPXUMA2 vs BTS70021EPPXUMA1 Сравнение
Подробное сравнение бок о бок BTS700121ESPXUMA2 от Infineon и BTS70021EPPXUMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Infineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 ✓ АктивенInfineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ АктивенСравнение характеристик
| Параметр | BTS700121ESPXUMA2 | BTS70021EPPXUMA1 |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Power MOSFET Drivers | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $2,62 | $1,32 |
| Функция | Power Switch / Driver 1:1 N-Channel | — |
| Топология | High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Continuous Load Current | 31.3 A | — |
| Family | PROFET (Protected FET) | — |
| Nominal Supply Voltage | 13.5 V | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Ron typ @ 25 C] | — |
| Number of Channels | 1 | — |
| Корпус | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) | PG-TSDSO-14-22 (exposed pad) |
| Number of Terminals | 24 | — |
| Terminal Pitch | 0.65 mm | — |
| Тип монтажа | Surface Mount | Surface Mount |
| Диапазон рабочих температур | -40 C to +150 C | -40 C to +150 C junction |
| Max Junction Temperature | 150 C | — |
| Protection Features | Overload, short-circuit, over-temperature, reverse battery, ground loss | — |
| Diagnostic Output | Analog current sense (IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | Yes (on-state and off-state) |
| Статус RoHS | Compliant | Compliant (Green Product) |
| Product Family | — | PROFET+2 12V |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Qualification | — | AEC-Q100 automotive qualified |