BTS70021EPPXUMA1 vs BTS700121ESPXUMA2 Vergleich
Detaillierter Direktvergleich von BTS70021EPPXUMA1 von Infineon und BTS700121ESPXUMA2 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ AktivInfineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 ✓ AktivSpezifikationsvergleich
| Parameter | BTS70021EPPXUMA1 | BTS700121ESPXUMA2 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,32 | $2,62 |
| Product Family | PROFET+2 12V | — |
| Topologie | Smart High-Side Switch, N-Channel MOSFET | High-Side |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | — |
| Current Sense Output (IS) | Analog proportional load current | — |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | — |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | Yes (on-state and off-state) |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | — |
| Betriebstemperaturbereich | -40 C to +150 C junction | -40 C to +150 C |
| Gehäuse | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| RoHS-Status | Compliant (Green Product) | Compliant |
| Funktion | — | Power Switch / Driver 1:1 N-Channel |
| Continuous Load Current | — | 31.3 A |
| Family | — | PROFET (Protected FET) |
| Nominal Supply Voltage | — | 13.5 V |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Ron typ @ 25 C] |
| Number of Channels | — | 1 |
| Number of Terminals | — | 24 |
| Terminal Pitch | — | 0.65 mm |
| Max Junction Temperature | — | 150 C |
| Protection Features | — | Overload, short-circuit, over-temperature, reverse battery, ground loss |
| Diagnostic Output | — | Analog current sense (IS pin) |