BTS70021EPPXUMA1 vs BTS700121ESPXUMA2 Comparación
Comparación detallada lado a lado de BTS70021EPPXUMA1 por Infineon y BTS700121ESPXUMA2 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ ActivoInfineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 ✓ ActivoComparación de especificaciones
| Parámetro | BTS70021EPPXUMA1 | BTS700121ESPXUMA2 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,32 | $2,62 |
| Product Family | PROFET+2 12V | — |
| Topología | Smart High-Side Switch, N-Channel MOSFET | High-Side |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | — |
| Current Sense Output (IS) | Analog proportional load current | — |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | — |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | Yes (on-state and off-state) |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C junction | -40 C to +150 C |
| Encapsulado | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| Estado RoHS | Compliant (Green Product) | Compliant |
| Función | — | Power Switch / Driver 1:1 N-Channel |
| Continuous Load Current | — | 31.3 A |
| Family | — | PROFET (Protected FET) |
| Nominal Supply Voltage | — | 13.5 V |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Ron typ @ 25 C] |
| Number of Channels | — | 1 |
| Number of Terminals | — | 24 |
| Terminal Pitch | — | 0.65 mm |
| Max Junction Temperature | — | 150 C |
| Protection Features | — | Overload, short-circuit, over-temperature, reverse battery, ground loss |
| Diagnostic Output | — | Analog current sense (IS pin) |