BTS70041EPPXUMA1 vs BTT60302ERAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS70041EPPXUMA1 von Infineon und BTT60302ERAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS70041EPPXUMA1 | BTT60302ERAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,45 | $2,18 |
| Part Family | HIC-PROFET +2 12V | — |
| Switch Type | High-Side N-Channel Smart Power Switch | 1:1 N-Channel high-side |
| Gehäuse | PG-TSDSO-14-22 (14-pin) | PG-TDSO-14-31 (14-pin, exposed pad) |
| Typical R_DS(on) | 4 mOhm at 25 °C | — |
| Nominal Load Current | 15 A (DC) | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Load-Dump Robustness | [DATA_NEEDED: load dump rating] | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Diagnostic Enable Pin (DEN) | Yes | — |
| Current Sense Output (IS) | Yes (analog proportional to load current) | — |
| Embedded Protection | Over-current, short-circuit, over-temperature, reverse battery | — |
| PWM Capability | Yes (low-duty cycle supported via integrated charge pump) | — |
| Betriebstemperatur | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | MSL3 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| Product Type | — | Dual-channel Smart High-Side Power Switch |
| Family | — | PROFET+ 24V |
| Number of Channels | — | 2 |
| On-State Resistance (typ, per channel, 25°C) | — | 32 mΩ |
| Continuous Load Current (per channel) | — | 4 A |
| Operating Supply Voltage (Vbb) | — | 8 V to 36 V |
| Load-Dump Tolerance | — | 42 V |
| Process Technology | — | Smart6 (vertical N-MOSFET + charge pump) |
| Diagnostic Output | — | Current sense (IS pin) |
| Protection Features | — | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection |
| Standby Current | — | [DATA_NEEDED: standby current] |