BTS70041EPPXUMA1 vs BTT60302ERAXUMA1 比較
詳細な並列比較: BTS70041EPPXUMA1 メーカー: Infineon および BTT60302ERAXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ 生産中仕様比較
| パラメータ | BTS70041EPPXUMA1 | BTT60302ERAXUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.45 | $2.18 |
| Part Family | HIC-PROFET +2 12V | — |
| Switch Type | High-Side N-Channel Smart Power Switch | 1:1 N-Channel high-side |
| パッケージ | PG-TSDSO-14-22 (14-pin) | PG-TDSO-14-31 (14-pin, exposed pad) |
| Typical R_DS(on) | 4 mOhm at 25 °C | — |
| Nominal Load Current | 15 A (DC) | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Load-Dump Robustness | [DATA_NEEDED: load dump rating] | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Diagnostic Enable Pin (DEN) | Yes | — |
| Current Sense Output (IS) | Yes (analog proportional to load current) | — |
| Embedded Protection | Over-current, short-circuit, over-temperature, reverse battery | — |
| PWM Capability | Yes (low-duty cycle supported via integrated charge pump) | — |
| 動作温度 | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| 実装タイプ | Surface Mount | Surface Mount |
| MSLレベル | MSL3 (per JEDEC J-STD-020) | — |
| RoHS ステータス | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| Product Type | — | Dual-channel Smart High-Side Power Switch |
| Family | — | PROFET+ 24V |
| Number of Channels | — | 2 |
| On-State Resistance (typ, per channel, 25°C) | — | 32 mΩ |
| Continuous Load Current (per channel) | — | 4 A |
| Operating Supply Voltage (Vbb) | — | 8 V to 36 V |
| Load-Dump Tolerance | — | 42 V |
| Process Technology | — | Smart6 (vertical N-MOSFET + charge pump) |
| Diagnostic Output | — | Current sense (IS pin) |
| Protection Features | — | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection |
| Standby Current | — | [DATA_NEEDED: standby current] |