BTS70081EPRXUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von BTS70081EPRXUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS70081EPRXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,95 | $3,18 |
| Funktion | Smart High-Side Power Switch (1:1 N-Channel) | Smart High-Side Power Switch |
| Anzahl der Ausgänge | 1 | — |
| On-State Resistance (R_DS(on) typ) | 8 mOhm at 25 C | — |
| Continuous Output Current | 11 A | — |
| Strombegrenzung | [DATA_NEEDED: typical current limit value] | — |
| Operating Supply Voltage (Vbb) | 6 V to 28 V | — |
| Load Dump Tolerance | [DATA_NEEDED: load dump peak V] | — |
| Standby Current | [DATA_NEEDED: standby Iq typ] | — |
| Betriebstemperaturbereich | -40 C to +150 C (junction) | -40 °C to +150 °C junction |
| Gehäuse | PG-TSDSO-14-22 (TSSOP-EP-14) | PG-TSDSO-14 (exposed thermal pad) |
| Pin-Anzahl | 14 | — |
| Montageart | Surface Mount | Surface Mount |
| Thermal Resistance R_theta_JA | 35 C/W (2s2p 1 oz FR4, per datasheet) | — |
| Diagnostic Features | Open-load, short-to-GND, short-to-Vbb, overtemperature, sense current output | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Automotive Qualified | Yes (AEC-Q100, PG-TSDSO-14-22 automotive grade) | — |
| RoHS Compliance | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Ausgangskonfiguration | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |