BTS70081EPRXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70081EPRXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70081EPRXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,95 | $3,18 |
| Fonction | Smart High-Side Power Switch (1:1 N-Channel) | Smart High-Side Power Switch |
| Nombre de sorties | 1 | — |
| On-State Resistance (R_DS(on) typ) | 8 mOhm at 25 C | — |
| Continuous Output Current | 11 A | — |
| Limitation de courant | [DATA_NEEDED: typical current limit value] | — |
| Operating Supply Voltage (Vbb) | 6 V to 28 V | — |
| Load Dump Tolerance | [DATA_NEEDED: load dump peak V] | — |
| Standby Current | [DATA_NEEDED: standby Iq typ] | — |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | -40 °C to +150 °C junction |
| Boîtier | PG-TSDSO-14-22 (TSSOP-EP-14) | PG-TSDSO-14 (exposed thermal pad) |
| Nombre de broches | 14 | — |
| Type de montage | Surface Mount | Surface Mount |
| Thermal Resistance R_theta_JA | 35 C/W (2s2p 1 oz FR4, per datasheet) | — |
| Diagnostic Features | Open-load, short-to-GND, short-to-Vbb, overtemperature, sense current output | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Automotive Qualified | Yes (AEC-Q100, PG-TSDSO-14-22 automotive grade) | — |
| RoHS Compliance | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |