BTS70101EPAXUMA1 vs BTS70041EPZXUMA1 Vergleich
Detaillierter Direktvergleich von BTS70101EPAXUMA1 von Infineon und BTS70041EPZXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS70101EPAXUMA1 | BTS70041EPZXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,84 | $1,05 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | High-Side N-Channel Power Switch (1:1) |
| Nominal Load Current | 9 A | — |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | — |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Thermisches Abschalten | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Gehäuse | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TDSO-14-11 (14-pin, exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 | — |
| RoHS-Status | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies AG |
| Series | — | PROFET®+2 (Automotive, AEC-Q100) |
| Number of Channels | — | 1 |
| Maximum Continuous Load Current | — | 15 A |
| Operating Voltage Range (Vbb) | — | 3.1 V to 28 V |
| Reverse Battery Robustness | — | -28 V on Vbb |
| On-State Resistance R_DS(on) | — | [DATA_NEEDED: R_DS(on) typical in mΩ] |
| Current Limitation | — | Active, with latch clear via DEN pulse |
| Overtemperature Protection | — | Yes (thermal shutdown with auto-restart) |
| Short-Circuit Protection | — | Yes (current-limit and latch) |
| Diagnostic Output | — | DEN pin (digital/analog fault feedback) |
| Input Pin (IN) | — | Logic-level control, 3.3 V / 5 V compatible |
| Operating Temperature Range (TJ) | — | -40 °C to +175 °C |
| MSL-Level | — | MSL 2A (4 weeks) |
| Qualification | — | AEC-Q100 (automotive grade) |
| Packaging | — | Tape & Reel |