BTS70101EPAXUMA1 vs BTS70041EPZXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70101EPAXUMA1 par Infineon et BTS70041EPZXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70101EPAXUMA1 | BTS70041EPZXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,84 | $1,05 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | High-Side N-Channel Power Switch (1:1) |
| Nominal Load Current | 9 A | — |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | — |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Arrêt thermique | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TDSO-14-11 (14-pin, exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 | — |
| Statut RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies AG |
| Series | — | PROFET®+2 (Automotive, AEC-Q100) |
| Number of Channels | — | 1 |
| Maximum Continuous Load Current | — | 15 A |
| Operating Voltage Range (Vbb) | — | 3.1 V to 28 V |
| Reverse Battery Robustness | — | -28 V on Vbb |
| On-State Resistance R_DS(on) | — | [DATA_NEEDED: R_DS(on) typical in mΩ] |
| Current Limitation | — | Active, with latch clear via DEN pulse |
| Overtemperature Protection | — | Yes (thermal shutdown with auto-restart) |
| Short-Circuit Protection | — | Yes (current-limit and latch) |
| Diagnostic Output | — | DEN pin (digital/analog fault feedback) |
| Input Pin (IN) | — | Logic-level control, 3.3 V / 5 V compatible |
| Operating Temperature Range (TJ) | — | -40 °C to +175 °C |
| Niveau MSL | — | MSL 2A (4 weeks) |
| Qualification | — | AEC-Q100 (automotive grade) |
| Packaging | — | Tape & Reel |