BTS70101EPAXUMA1 vs BTS70081EPAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS70101EPAXUMA1 von Infineon und BTS70081EPAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS70101EPAXUMA1 | BTS70081EPAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,84 | $0,96 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (PROFET) |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | — |
| Nominal Load Current | 9 A | — |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | — |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Thermisches Abschalten | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Gehäuse | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +150 C | -40 C to +150 C (Tj) |
| Automotive Qualification | AEC-Q100 | — |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 10 A |
| On-State Resistance (RDS(on) typ.) | — | 9 mOhm |
| Betriebsversorgungsspannung | — | 6 V to 18 V |
| Load-Dump Survival Voltage | — | 28 V (per AEC-Q100) |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Current Limitation (typ.) | — | [DATA_NEEDED: IL(LIM) value] |
| Diagnostic Output | — | Open-drain status / current sense |
| Protection Features | — | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss |
| Package Width | — | 3.90 mm (TSSOP-14 EP equivalent) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |