BTS70101EPAXUMA1 vs BTS70081EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70101EPAXUMA1 par Infineon et BTS70081EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70101EPAXUMA1 | BTS70081EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,84 | $0,96 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (PROFET) |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | — |
| Nominal Load Current | 9 A | — |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | — |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Arrêt thermique | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C | -40 C to +150 C (Tj) |
| Automotive Qualification | AEC-Q100 | — |
| Statut RoHS | Compliant | Compliant |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 10 A |
| On-State Resistance (RDS(on) typ.) | — | 9 mOhm |
| Tension d'alimentation de fonctionnement | — | 6 V to 18 V |
| Load-Dump Survival Voltage | — | 28 V (per AEC-Q100) |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Current Limitation (typ.) | — | [DATA_NEEDED: IL(LIM) value] |
| Diagnostic Output | — | Open-drain status / current sense |
| Protection Features | — | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss |
| Package Width | — | 3.90 mm (TSSOP-14 EP equivalent) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |