BTS70202EPAXUMA1 vs BTS70081EPAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS70202EPAXUMA1 von Infineon und BTS70081EPAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS70202EPAXUMA1 | BTS70081EPAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,62 | $0,96 |
| Product Type | Smart High-Side Power Switch (dual channel) | Smart High-Side Power Switch (PROFET) |
| Technology | SMART7 (PROFET family) | — |
| Number of Channels | 2 | — |
| Ausgangskonfiguration | High-side, 1:1 N-Channel MOSFET per channel | — |
| Continuous Load Current (per channel) | 2.5 A | — |
| Total Device Load Current | 5 A | — |
| On-State Resistance (typ, per channel) | 30 mΩ | — |
| Operating Voltage Range (Vbb) | 6 V to 18 V (load dump tolerant) | — |
| Current Limit (typ) | 12 A (selectable) | — |
| Diagnostic Output | Analog current sense (IS pin) per channel | Open-drain status / current sense |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Gehäuse | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +150 C (junction) | -40 C to +150 C (Tj) |
| Packing | Tape & Reel (XUMA1 suffix) | — |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 10 A |
| On-State Resistance (RDS(on) typ.) | — | 9 mOhm |
| Betriebsversorgungsspannung | — | 6 V to 18 V |
| Load-Dump Survival Voltage | — | 28 V (per AEC-Q100) |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Current Limitation (typ.) | — | [DATA_NEEDED: IL(LIM) value] |
| Package Width | — | 3.90 mm (TSSOP-14 EP equivalent) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |